®
Environmental Equipment, Inc.
IMR EX610 User Manual
3632 Central Ave. St. Petersburg, FL 33711 – Phone: 727-328-2818 / 800-RING-IMR – Fax: 727-328-2826 – E-mail: [email protected] – Web: www.imrusa.com
THE PRIDE OF THE COMPANY – MADE IN THE USA
Page
21
of
27
8.
WARNINGS
Do not drop the detector from high places or subject it to extreme vibration.
If there are high concentrations of interfering gasses the detector may not work as expected.
Only operate and handle in strict accordance with this document. Failure to do so can cause the detector to
be inaccurate or cause damaged to it.
Do not store the detector in a location with caustic gases (such as CL2).
Do not use or store the detector in extreme environments such as excessive high and low temperature,
higher humidity, electromagnetic field and strong sunlight.
After extended use if there is debris on the detector clean it with a soft cloth. Avoid the use of caustic
substances or abrasive objects. This can cause damage to the detectors exterior.
To ensure detector accuracy it should be calibrated regularly. Time between calibrations should not exceed
one year.
Do not recharge nor upload data in hazardous areas.
Do not dispose of the battery by discarding it into the trash. Follow all local environmental and
governmental regulations when disposing of the battery.
For any malfunction or issue not covered by this manual contact IMR for solutions.
