Impresind ColdAIR FPA109, Инструкция по эксплуатации и обслуживанию

Страница: 22 / 34

GB
8
2.2.2 Switching ON
Keep key pressed until the display will shows the time
2.2.4 Starting mode
2.2.4.1 Manual start mode
With the machine switched on, press several times the key until the led goes on the corre-
sponding operation mode required:
Cooling
Ventilation
When lit, indicates that the unit is working in manual ventilation mode
.
When lit, indicates that the unit is working in automatic ventilation mode.
When lit, indicates the day - of–the - week is shown: 1°= Monday …
Blinks during modifying values or parameters.
En Communication doesn’t work properly. It’s possible a wrong connection of the wires
oFF
Unit off. Attention: the panel is always powered - on
.
FAn
Ventilation mode only.
P-00
STARTING COOLING - Waits for the drain valve to close and turns the water pump on.
P-01
COOLING.
P-02
DRAIN
Cln
SELF CLEANING
StOP
End of program - oFF period
Loc Control unit locked
- -: - - Free space in memory
- - Temperature and humidity probe disconnected
EE Eeprom failure, try to turn off and turn on the unit
EA TIME OUT filling or draining tank failure. To cancel the event, try to power off and to power
on again. If failure is still on display, it is necessary to do maintenance the unit.
2.2.3 Switching Off
To stop the unit functioning, keep key pressed until the display will show oFF
Etc
Clock error. The time on the remote controller is not set. The device sets automatically the
time to 8.10 am on Monday. Until the time is not set, the display will show the same messa-
ge. Set the current time.