Impos HS 4517, Руководство по эксплуатации

Страница: 13 / 32

GB-1
Translation of the original Operating Instructions
CONTENT Page
Illustrations 1 - 2
Pictogram illustration and explanation
3
Technical data GB-1
Safety instructions GB-2
General safety information for power tools GB-2
Intended use GB-4
Before use GB-5
Instructions foruse of the equipment GB-5
Switching on and off GB-5
Maintenance GB-5
Holding the hedge trimmer when in use GB-5
Optimum safety GB-5
Storing the trimmer after use GB-6
Repair service GB-6
Spare parts GB-6
Waste disposal and environmental protection GB-6
Warranty GB-6
Declaration of Conformity GB-7
GB
| Operating Instructions
Electric Hedge Trimmer
Technical data HS 4517 Impos
Operating Voltage V~ 230-240
Nominal Frequency Hz 50
Nominal Consumption W 550
No-load Speed n
0
min
-1
1700
Cutting length mm 450
Cutting capacity mm 16
Weight (without flex) kg 3,1
Noise Pressure Level L
pA
(according to EN 60745-1+EN 60745-2-15)
dB (A) 92,5 K 3,0 dB (A)
Vibration
(according to EN 60745-1)
m/s
2
4,085 K 1,5 m/s
2
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.