I-Control manual
page 29
Analog dirty water sensor connection diagram
21 + 35 =
0-10V Input for dirty water sensor
21 = 0-10V input
35 = GND
11 + 25 =
24V DC power supply
Maximum 50 mA.
12 + 26 =
12V DC power supply
Maximum 50 mA.
13 + 27 =
GND power supply
Important: The jumper of the 0-10V input must be in ‘VOLT’ position. See diagram.
Note:
Always use shielded cable with a minimum diameter of 0,8 mm² for the dirty water sensor and connect the
shield to the GND terminal.
Note:
The
12V or 24V power supply with a maximum of 50 mA can also be used to power a pollution sensor.
Note:
The GND connection of the power supply is galvanically connected to all other GND connections, such as the
sensor inputs.
