CHEETAH Hardware User’s Manual
Imperx, Inc.
Rev. 6.2
6421 Congress Ave.
7/7/2015
Boca Raton, FL 33487
+1 (561) 989-0006
27 of 152
1.5.4 Camera Power Connector
The male 12-pin Hirose connector provides power and all external input/output
signals supplied to the camera. Refer to Fig 1.5 for connector pin-outs. Refer to
Table 1.6 for corresponding pin mapping. The connector is a male HIROSE type
miniature locking receptacle #HR10A-10R-12PB (71). The optionally purchased
power supply is shipped with a power cable which terminates in a female HIROSE
plug #HR10A-10P-12S(73).
Figure 1.6– Camera Power Connector
(Viewed from rear)
Pin
Signal
Type
Description
1
12 VDC Return
Ground Return
12 VDC Main Power Return
2
+ 12 VDC
Power - Input
+ 12 VDC Main Power
3
NC
–NC
No Connect
4
NC
NC
No Connect
5
GP OUT 2
Opto- Switch contact 2
General Purpose Output 2-
6
GP Out 1 RTN
TTL Ground Return
General Purpose Output 1 Return
7
GP OUT 1
TTL OUT 1
General Purpose Output 1
8
GP IN 1
Opto-isolated IN 1
General Purpose Input 1
9
GP IN 2
TTL/LVTTL IN 2
General Purpose Input 2
10
GP IN 1 Return
Ground Return IN1
General Purpose Input 1 Return
11
GP IN 2 Return LVTTL Ground Return IN2
General Purpose Input 2 Return
12
GP OUT 2
Opto-Switchcontact 1
General Purpose Output 2+
Table 1.6
Camera Power Connector Pin Mapping
