CHEETAH Hardware User’s Manual
Imperx, Inc.
Rev. 6.2
6421 Congress Ave.
7/7/2015
Boca Raton, FL 33487
+1 (561) 989-0006
18 of 152
Digital gain
0 to 24dB
0 to 24dB
Black level offset
0 to 2048, 1/step
0 to 2048 1/step
User LUT
2 LUTs: Gamma, User LUT
2 LUTs: Gamma, User LUT
Dual Frame Switching
Control
Manual, Auto, External Trigger
Manual, Auto, External
Trigger
Hardware trigger
Asynchronous
Asynchronous
Strobe Modes
Programmable Width, Delay , Programmable Width, Delay
Trigger Sources
External , Pulse Generator,
Computer
External, Pulse Generator,
Computer
Trigger features
Rising/Falling edge, De-glitch,
Delay, Strobe
Rising/Falling edge, De-glitch,
Delay, Strobe
Size (W x H x L) - CLB
(72.0 x 72.0 x 39.8) mm
(72.0 x 72.0 x 39.8) mm
Weight
384 g
TBD
Lens Mount
F-Mount, C-Mount, 4/3” format
C-Mount– 1” format
Power:
12V / 0.34 A
TBD
Table 1.2
Cheetah C2880, C4080 Camera Specifications.
1.5 CAMERA CONNECTIVITY
1.5.1 CLF (Full) - Camera Link (CL) Output
The interface between the CHEETAH cameras and outside equipment is done via 2
connectors and one LED, located on the back panel of the camera – Figure 1.3.
1.
Two camera outputs – standard Full Camera Link Mini connectors provides data,
sync, control, and serial interface.
2.
Male 12-pin Power Connector – provides power and I/O interface.
3.
USB type B programming/SPI connector.
4.
Status LED – indicates the status of the camera – refer to Status LED section.
5.
Model / Serial Number – shows camera model and serial number.
