Adapt-A-Link
Manual
Imperx Inc.
Adapt-A-Link Manual
6421 Congress Ave.
Rev 1.0
Boca Raton, FL 33487
01.14.05
67
PIN
Camera
Signal
Link
Si
e
gnal Nam
1
Inner Shield
Inner Shield
14
Inner Shield
Inner Shield
2
- Y 0
- PAIR 1
15
+ Y 0
+ PAIR 1
3
- Y 1
- PAIR 2
16
+ Y 1
+ PAIR 2
4
- Y 2
- PAIR 3
17
+ Y 2
+ PAIR 3
5
- Y CLK
- PAIR 4
18
+ Y CLK
+ PAIR 4
6
- Y 3
- PAIR 5
19
+ Y 3
+ PAIR 5
7
N/C
+ PAIR 6
20
N/C
- PAIR 6
8
N/C
- PAIR 7
21
N/C
+ PAIR 7
9
N/C
- PAIR 8
22
N/C
+ PAIR 8
10
N/C
+ PAIR 9
23
N/C
- PAIR 9
11
N/C
- PAIR 10
24
N/C
+ PAIR 10
12
N/C
+ PAIR 11
25
N/C
- PAIR 11
13
Inner Shield
Inner Shield
ents for the second (Medium) 26 pins output connector.
2. PIXEL CLOCK - Reference cam
3. SERIAL DAT
ame grabber (Ser
TFG). SERIAL
4. SERIAL DATA OUT -
5. RS232 Rx - Se
6. RS232 Tx - Serial communications signal going to the camera (Ser TC).
7. RS232 Tx/Rx and SERIAL DATA IN/OUT are mutually exclusive. The serial interface
can be switched from RS232 (default) to SERIAL DATA with a set of jumpers located
inside the box
October 1, 2004 do not support RS232 interface.
Please contact Imperx for more information.
8. 6.0 VDC OUT - Provides power (if needed) for the next Adapt-A-Link unit, if two or
more adapter units are used in the same chain. Each unit can provide 1000 mA MAX.
9. 6.0 VDC GROUND - Ground return from the next Adapt-A-Link unit in the chain.
10. N/C – not used, not connected.
Table 30b. Pin assignm
SIGNAL INFORMATION
1. DATA (0 – 47) – 48 bit actual data.
era clock (X CLK). Maximum frequency is 66 MHz.
A IN - Serial communications signal going to the fr
DATA IN/OUT are 3.3V LVTTL level signals.
Serial communications signal going to the camera (Ser TC).
rial communications signal going to the frame grabber (Ser TFG)
.
Units sold prior to