Adapt-A-Link
Manual
Imperx Inc.
Adapt-A-Link Manual
6421 Congress Ave.
Rev 1.0
Boca Raton, FL 33487
01.14.05
32
lution digital LVDS camera to any standard Camera
Link frame grabber. It converts t
erface signals to a standard base
onfiguration Camera Link output in
data signals, 4 control
gnals, 4 enable signals, one clock signal, and one RS232 serial interface. The maximum data
back and front view of the BLC. Table 13 describes the bit
assignments for base Camera Link interface. Table 14 describes the pin assignments for the 100
pin input connector. Table 15 describes the pin assignments for the 26 pin Camera Link output
connector. Detailed views of the LVDS input and Camera link output connectors are shown in
Appendix 1.
2.6 BLC – LVDS to Base Camera Link Converter
BLC is designed to interface any high-reso
he standard LVDS (RS644) int
terface – Figure 12. BLC supports 24
c
si
clock is 66 MHz. Figure 13 shows
Figure 12. BLC Connectivity.
13. B
front
) and b
(bott
iews
Figure
LC
(top
ack
om) v
.