Imperial G.2000, Руководство по сборке

Страница: 6 / 12

Pag. 8
Working in the inside cabinet, first insert the washer (rounded shaped) and then the nut (fig.16) and tighten them
up using the spanner (fig. 17). The first two legs should be attached at the same table side, to make sure you use
the right ones (fig. 18). Put on the third leg without tightening the bolts.
Fit in the central panel into the leg grooves (fig. 19), making sure that the panel has its curve upward and that the
holes in the panel are inwards (fig. 20).
fig. 19 fig. 20 fig.
1
8
fig. 17
fig. 16