background image

Pag. 4 

WARNING, READ AND KEEP 

This product is not suitable for use by children under 3 years. 

Small balls might be swallowed or inhaled. 

Care and maintenance instructions for your table 

Congratulations!  You have bought a first quality table. 

It is an indoor table: please assemble it and use it indoors only. 

IMPORTANT:  Once  assembled  your  table  is  quite  wide  and  may  not  fit  through 
your doors. For this reason you should assemble it in the room you intend it to be 
used. Should you wish to move your table to another room, it might be necessary 
to remove its legs. 

In order to ensure its long life and continued playing appeal, we recommend that 
you  follow the simple instructions below: 

1. Your table has been manufactured for indoor playing: do not leave it outdoors.

Rain, snow and high humidity may damage its materials. Prolonged exposure
to the sun is to be avoided too, due to its ultraviolet effects which will ruin the
colours.

2. Clean your table periodically. It is sufficient to wipe its surfaces using a damp

cloth. For a deeper cleaning you can use any household detergent which does
not  contain  wax  or  abrasives.  Should  you  wish  to  furtherly  improve  bars
smoothness,  only  employ  a  good  quality  silicone  spray.  Please be  careful not
to use any vegetal or any other type of grease or you run the risk of attracting
dirt.

Содержание G.2000













Отзывы: