Impecca VP-120K, Руководство пользователя

Страница: 12 / 55

12
ENGLISH
ESP
AÑOL
FRANÇAIS
AV INPUT
The "AV" input on the projector is for older RCA connections and requires a 3.5 mm AV cable,
such as the following:
AUDIO (left)
AUDIO (right)
VIDEO
HDMI1 AND HDMI2
Simply connect your HDMI source to these inputs. HDMI cables carry both video and audio.
VGA (PC INPUT)
The VGA input supports the following resolutions. You may need to set your PC display settings
to one of these video modes (at one of the listed refresh rates) before connecting it to the
projector and selecting VGA as the input with the SOURCE button. Note that VGA is a video-only
connection and does not carry audio.
Resolution Hz (refresh rate)
640 x 480 60, 70, 72, 75
800 x 600 50, 56, 60 ,70, 72, 75
1024 x 768 50, 60 ,70
MEDIA PLAYER MODE (USB / SD CARDS)
Your projector has both a USB port and an SD card slot for media playback. Each slot supports
a card or drive of up to 32GB capacity. The projector supports viewing or playback of .jpg, mp3,
or mpeg video. Press SOURCE and select the Media Player. Select USB or SD if necessary, then
the media player interface will appear, allowing you to play back the content. Most of the play
controls are self-explanatory, but here is an explanation of some of the extra features that you
can select during playback:
Manage Playlist
Slow motion (video)
Display information about the current media Step forward one frame (video)
Remember:
• Only 200 files per folder are supported. Please make sure pictures and other media do not
exceed this limit.
• When adding or removing USB or SD media, power off the projector first, change the media,
then power back on.
To Projector AV input