Impacts STREAMER S125E, Руководство по эксплуатации

Страница: 24 / 40

S125E Operating Manual
22
6.7 Restarting after a Fault
After a fault make sure that you find the reason of the fault before you restart the machine.
If you do not find the fault or if you are unsure about the reason for the fault, please contact your
IMPACTS contact person and ask for help.
For the start up of the machine, see Chapter 5.
All persons in the proximity of the machine must wear safety glasses with lateral
protection as well as safety shoes. Ear protection may be required. The operator is
obliged to wear close fitting protective clothing.
Please consider special regulations in VBG 4 and VDE-0701.These regulations
describe the necessary considerations and actions after repairing and changing
electrical Equipment. For start up of the machine, see chapter 5.
6.8 Proceedings Prior and After Longer Stoppage
Stoppage Longer Than 3 Months:
• Switch off the machine (see Chapter 6).
• Remove all abrasive out of the machine.
• Remove all abrasive from magnets.
• Clean the machine and cover with a tarp in a dry area.
• Ensure that motors, cables, and plugs are protected against moisture, dust, heat, and shock.
• Protect bright parts of the machine and power pack with a preservative oil or grease.
After Longer Stoppage:
• See Chapter 5 "Initial Operation."