Impacts STREAMER S125E, Руководство по эксплуатации

Страница: 18 / 40

S125E Operating Manual
16
Before start-up operators and other personnel must be familiar with the safety
regulations given in this manual.
1. Place the blast machine and the filter unit onto the surface to be treated.
2. Check the main power cable and the dust hose for damage. Replace or repair all damaged
parts before starting the machine.
3. Connect the blast machine and the filter unit with the dust hose. Use hose clamps at the
connections.
4. Connect the power supply cable of the blast-machine with the site supply or filter unit. Make
sure that the correct electric supply is available (110v-60Hz).
5. Make sure the dust filter unit bin is empty. Comply with local waste treatment regulations
considering the removal of materials.
Check the function of the FI-switch trough by pushing the test switch!
6. Remove the cover (1) of the separator by
loosening the screws (2). Lift the cover upward
and place it beside the machine while filling
abrasive.
7. Fill the Separator (3) with abrasive up to ~
60 mm below the separator opening up to
the edge (4) (ca.2.5kg). Make sure, that the
abrasive valve (5) is closed.
8. Replace the cover and tighten the screw.
9. Use vent on top of cover to manually adjust
dust filter suction.