Impacts STREAMER S125E, Руководство по эксплуатации

Страница: 23 / 40

Operating Manual S125E
21
6.4 Turning Off the Machine
To switch off the machine, please follow the described procedure:
1. Close the abrasive feed valve by releasing
the lever (1) while the machine is still moving
forward.
NOTE: Keep moving the machine forward
as long as the feed valve is not fully closed
to assure no grooves are blasted into the
surface.
2. Stop the wheel motor by using the switch (2).
3. Finally, switch off the filter unit.
If the machine will not be used for an extended period of time, pull out the main
plug. Store the machine and cover by a tarp in a dry area.
6.5 Safety Shutdown
The machine must be set into its “Safety Off Position” before starting any kind of maintenance or
repair work. See Chapter 2 “Safety Instructions.”
6.6 If Failure Occurs
In a case of an emergency, immediately release the lever (1) and stop the wheel motor by using the
switch (2).
For repair work, inspection, and all maintenance work, make sure all turning parts
are at a standstill and secure the machine in the safety-off position (Chapter 2).
Regardless of the following information in Chapter 7, the local safety regulations are
valid in any case for the operation of the machine.