background image

22

This Impact product is warranted to the original purchaser to be free from defects in materials and 
workmanship under normal consumer use for a period of one (1) year from the original purchase date 
or thirty (30) days after replacement, whichever occurs later� The warranty provider’s responsibility 
with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s 
discretion, of any product that fails during normal use of this product in its intended manner and in 
its intended environment� Inoperability of the product or part(s) shall be determined by the warranty 
provider� If the product has been discontinued, the warranty provider reserves the right to replace it 
with a model of equivalent quality and function�

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, 
abuse, improper installation or maintenance� EXCEPT AS PROVIDED HEREIN, THE WARRANTY 
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, 
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE� This warranty provides you with specific legal rights, and you may 
also have additional rights that vary from state to state�

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return 
merchandise authorization (“RMA”) number, and return the defective product to Impact along with the 
RMA number and proof of purchase� Shipment of the defective product is at the purchaser’s own risk 
and expense�

For more information or to arrange service, visit www�impactstudiolighting�com or call Customer 
Service at 212-594-2353�

Product warranty is provided by the Gradus Group�

www�gradusgroup�com

Impact is a registered trademark of the Gradus Group� © 2014 Gradus Group LLC� All Rights Reserved�
Other product and corporate names mentioned herein are trademarks of their respective holders�

One-Year Limited Warranty

Содержание Astral Extreme AS-X-400

























Отзывы: