impact Astral Extreme AS-X-400, Инструкция по эксплуатации

Страница: 16 / 24

15
There are three ways to trigger the flash: 1/4” phono, optical slave, or wireless remote
(sold separately)� When you trigger the flash, the flash ready indicator light will turn
off and then turn on when the flash has recycled and is ready for another flash� If audio
confirmation is activated, the monolight will emit a beep when the flash has fully
recycled�
1/4˝ Phono
To trigger via a 1/4˝ phono cord, use the included PC sync to 1/4˝ phono cord to
connect your camera’s PC sync terminal to the Astral Extreme’s 1/4˝ phono socket� A
remote slave receiver can also be plugged into this socket�
Wireless Optical Slave
The Astral Extreme is equipped with a wireless
optical slave feature, allowing you to fire the
monolight remotely� There are two slave modes
on the Astral Extreme: Instant-Fire and Skip
Preflash�
Instant-Fire slave mode fires the monolight
as soon as it sees a flash� Skip Preflash mode
ignores the preflash from the master and fires
only with the main flash�
To set the slave mode, press the slave button (A) repeatedly until the slave indicator
light turns the proper color� In Instant-Fire mode the slave indicator light will glow blue
(B), and in Skip Preflash mode the indicator will glow red (C)�
Note: When positioning wireless slaves to light a subject, make sure to maintain a clear
line of sight between the master and the optical slave sensor� Keep in mind that the
effective communication range between master and slave flash units is approximately
33’ (10 m)�
Triggering the Flash
B
A
C