IMO ISOCON-6 Скачать руководство пользователя страница 16

Страница: 16 / 16

ISOCON-6 USERS GUIDE

8. SPECIFICATIONS ( @ 25°C):

Operating Temperature: 0 to 55 °C

Operating Altitude: Sea Level to 2000m

Humidity: 0-90% RH

Power Requirements:
DC Supply: 12 to 36Vdc
AC Supply: 12 to 32Vac

Current Consumption: 55mA @ 24Vdc (20mA in & out)
85mA @ 24Vdc (maximum load, tx supply)
200mA @ 12Vdc (maximum load, tx supply)
260mA for 50ms on 24Vdc power up

Transmitter Power Supply: 22V to 29V @ up to 24mA
Dependant on supply voltage and load

Calibration accuracy: ±0.05% full scale

Linearity: ±0.05% full scale

Temperature Stability: 50ppm / °C

Input Impedance:
Current Input: 15 ohms
Voltage Input: 1 Mohm
Millivolt Input: Greater Than 10 Mohm

Thermocouple Burn Out Current: 500nA Nominal

Cold junction compensation accuracy: ±0.5°C over operating range

Maximum Voltage Output: 11.5 V into a minimum of 7Kohm

Maximum Current Output: 23.0 mA into a maximum of 1Kohm

Time Response: (90% of step change): 50ms ± 10ms

Unit has full 3 port Isolation to 1kV between Power Supply, Input and Output.
The unit can also withstand transients of 2.5kV for 50 μsecs.

Dimensions: 114.5 mm x 99mm x 12.5mm (H x D x W)

Mounting: DIN Rail TS35

Connections: Screw Clamp with pressure plate

Conductor Size: 0.5 to 4.0 mm

Insulation Stripping: 12 mm

Maximum Terminal Torque: 0.4 Nm

Weight Approx. 95g

EMC Emissions:
EN50081-1:1992
EN50081-2:1993

EMC Immunity: EN50082-1:1997

LVD Standards: EN61010-1:1993

Installation Category (IEC 664): II

Pollution Degree (EN61010-1:1993): 2

Equipment Class (IEC 536): II

ISOCON-6

24V AC or DC POWERED ISOLATING SIGNAL CONVERTER

Содержание ISOCON-6

















Результаты поиска

Содержание ISOCON-6

Отзывы:

Похожие инструкции для ISOCON-6

Бренды по названию

Популярные бренды

IMO ISOCON-6, Руководство пользователя

Результаты поиска

Содержание ISOCON-6

Отзывы:

Похожие инструкции для ISOCON-6

Бренды по названию

Популярные бренды