IMO i3N Series, Руководство пользователя

Страница: 26 / 94

26
Table 5.3 – %SR Registers – Master %SR Table
Register
Default I/O
Name
Description
Min-Max
Values
Program
(Read/Write)
Display
(Read/Write)
%SR152.3*
MJ1 Termination Enable
*i3AX/BX, I3N2414 Only
Read / Write Read / Write
%SR152.4*
MJ1 Biasing
*i3HX
CAN Termination Enable
*i3CL & i3EL Only
Read / Write Read / Write
%SR153-163 Reserved
%SR164 Failsafe / Clone
%SR164.1 RS485 Port Biasing #1 (MJ1 or MJ2) Read / Write Read / Write
%SR164.2
RS485 Port Biasing #2 (MJ2 or MJ3) Read / Write Read / Write
%SR164.3 AUTO_RESTRD Indicates Automatic Restore Operation
has been performed
Read Only Read Only
%SR164.4
BCKUP_TAKN
Indicates Backup of Registers has been
taken
Read Only Read Only
%SR164.5
EN_AUTO_RN
Enable AUTORUN – Sets “Enable
AutoRun” to “Yes” or “No” Read / Write Read / Write
%SR164.6
EN_AUTO_LD
Enable AUTOLOAD – Sets “Enable
AutoLoad” to “Yes” or “Not”
Read / Write Read / Write
%SR164.7 STRT_BCKUP
Start Backup trigger bit – Setting TRUE
starts backup of all register data
Read / Write Read / Write
%SR164.8 CLR_BACKUP
Clear Backup trigger bit – Setting TRUE
clears backup of all register data (if a
backup was done previously)
Read / Write Read / Write
%SR164.9 MAKE_CLONE
MAKE_CLONE trigger bit = Setting TRUE
does a Load Clone (if a media card is
present)
Read / Write Read / Write
%SR164.10 LOAD_CLONE
LOAD_CLONE trigger bit – Setting TRUE
does a LOAD CLONE (if a media card is
present that contains clone files)
Read / Write Read / Write
%SR164.11
MK_CLN_FL
Make Clone Fail (This bit goes high when
Make/Create Clone fails)
Read / Write Read / Write
%SR164.12
LD_CLN_FL
Load Clone Fail (This big goes high
when Load Clone fails)
Read / Write Read / Write
%SR164.14
Set to 1 to restore data manually, and
this in turn sets %SR164.15 to 1.
Set to 0 to abort restore operation.
*I3N Units Only
Read / Write Read / Write
%SR164.15
Set to 1 for manual restore of data.
Set to 0 to complete the restore
operation.
*I3N Units Only
Read / Write Read / Write
%SR165-166 Reserved
%SR167
Screen Update Time, Default= 5
*i3CL & i3ELOnly – Default = 10
2 to 50 Read/Write Read/Write
%SR168-170 Reserved
%SR171 X-Coordinate Touched Read Only Read Only