Immergas Victrix Zeus 25, Инструкции и рекомендации

Страница: 24 / 68

24
A
B
A
C
25
1
2
3
3
3
4
5
6
7
6 8
9
A
10
11
12
12
26
24
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
Kit composition:
Ref. Q ty Description
1 1 Door adaptor Ø 100 or Ø 125
2 1 Door gasket made of neoprene
3 4 Screws 4.2 x 9 AF
4 1 Hex headed screw M6 x 20
5 1 Flat nylon washer M6
6 2 Door hole closure metal-sheet plate plug
7 1 Plug gasket made of neoprene
8 1 Toothed washer M6
9 1 Nut M6
10 1 (kit 80/125) Concentric gasket Ø 60-100
11 1 (kit 80/125) Flanged adapter Ø 80-125
12 4 (kit 80/125) Hex headed screws M4 x 16 slotted
- 1 (kit 80/125) Bag of lubricating talc
Supplied separately:
Ref. Q ty Description
A 1 Ducting kit door
Ducting
Ø 6 0 Rigid and
Ø 50 Flexible
(A) mm
SHAFT
(B) mm
SHAFT
(C) mm
66 106 126
Ducting
Ø 8 0 Flexible
(A) mm
SHAFT
(B) mm
SHAFT
(C) mm
90 130 150
Ducting
Ø 8 0 Rigid
(A) mm
SHAFT
(B) mm
SHAFT
(C) mm
86 126 146
Kit Assembly.
- Mount the components of kit "C9" on the door (A) of the ducting
system (Fig. 26).
- (Version Ø 125 only) mount the fl anged adaptor (11) interposing
the concentric gasket (10) on the boiler, fitting it with the screws
(12).
- Mount the ducting system as described in the relative instruc-
tions sheet.
- Calculate the distances between the boiler drain and the bend
of the ducting system.
- Prepare the boiler fl ue system, making sure that the internal pipe
of the concentric kit is fitted up to the end stop in the ducting
system curve ( Q uota "X" Fig. 27), whereas the external pipe must
reach the end stop of the adapter (1).
N.B.: to encourage the removal of possible condensate forming in the
exhaust pipe, tilt the pipes towards the boiler with a minimum slope of
1.5 % .
- Mount the cover (A) complete with adaptor (1) and caps (6) on
the wall and assemble the fl ue system to the ducting system.
N.B.:
(version Ø 125 only) before assembly check the gaskets are in the
right position. In the event component lubrication (already carried out
by the manufacturer) is not su ffi cient, remove the residual lubricant
using a dry cloth, then to ease fitting coat the parts with common or
industrial talc.
Once all components have been assembled properly, the exhaust
fumes will be expelled via the ducting system; the combustion
air for normal boiler operation will be aspirated directly by the
shaft (Fig. 27).
1.1 7 ADAPTOR C9 KIT INSTALLATION.
Th is kit allows an Immergas boiler to be installed in "C
93
" configu-
ration, with combustion air intake directly from the shaft where
the fl ue gas exhaust is, obtained by means of a ducting system.
System composition.
Th e system must be combined with the following components
(sold separately) to be functional and complete:
- kit C
93
Ø 100 or Ø 125 version;
- rigid ducting Ø 60 and Ø 80 and fl exible Ø 50 and Ø 80 kit;
- fl ue exhaust kit Ø 60/100 or Ø 80/125 configured according to
the installation and type of boiler.
Installation drawings key:
Unique identification of the component
in the kit
Identification of the component not sup-
plied in this kit
1
A