Immergas Victrix Zeus 25, Инструкции и рекомендации

Страница: 23 / 68

23
C
8 3
24
C
43
23
23
INS
TALLER
US
ER
MAINTEN
AN
CE TECHNI
CI
AN
80 mm
Minimum slope 1.5 %
end stop; making sure that the internal wall sealing plate has
been fitted, this will ensure sealing and joining of the elements
making up the kit.
•
Installation clearances ( Fig. 23 ) .
Th e minimum installation clearance measurements of the Ø
80/80 separator terminal kit have been stated in some limit
conditions.
• Extensions for separator kit Ø 8 0/ 8 0.
Th e maximum vertical straight length (without bends) that
can be used for Ø 80 intake and exhaust pipes is 41 metres, re-
gardless from whether they are used for intake or exhaust. Th e
maximum horizontal straight length (with bend in suction and
in exhaust) that can be used for Ø 80 intake and exhaust pipes
is 36 metres, regardless from whether they are used for intake
or exhaust. Please note the type of installation C
43
must be done
with a natural draught fl ue.
N.B.: to favour the removal of possible condensate forming in the
exhaust pipe, tilt the pipes towards the boiler with a minimum
slope of 1.5 % (Fig. 24).