Immergas ARES PRO 150 Скачать руководство пользователя страница 20

Страница: 20 / 48

Instructions for the installer

3.2 PACKAGING

Make sure the content is intact.

Packaging materials (cardboard box, straps, plastic bags,

etc.)

constitute a potential hazard and must be kept

out of the reach of children

Immergas

will not be held liable in case of damage

caused to people, animals or property due to failure to

observe the above.

ARES

PRO

depth (mm)

width (mm)

height (mm)

Net Weight (kg)

Package Weight (kg)

150

1280

970

2700

303

355

230

1280

970

2700

375

427

300

1280

970

2700

508

560

348

1500

1214

2142

704

771

400

1500

1214

2142

704

771

500

1500

1214

2142

705

772

600

1500

1214

2142

843

910

(*) casing - (**) pallet - (***) cardboard

Besides the device, the package also contains a box of accessories

comprising:

- 5 bends + one T + plastic cap for condensate drain

- External probe

- Storage tank probe

- Cables metal-sheet plate outlet

- SHC multifunction module kit

- 1 m condensate drain trap pipe.

3.2.1 HANDLING

The boiler can be lifted from the holes on the upper

plate or by means of a pallet truck.

OBLIGATION!

wear protective gloves

- The boiler must only be transported using suitable

transport devices.

- Protect all parts against impacts, if they must be

transported.

- Follow the transport instructions on the package.

STD.005480/001

Содержание ARES PRO 150

















































Результаты поиска

Содержание ARES PRO 150

Отзывы:

Immergas ARES PRO 150, Инструкции и рекомендации, Страница: 20 / 48

Результаты поиска

Содержание ARES PRO 150

Отзывы: