Immergas 3.025499 Скачать руководство пользователя

Страница: 28 / 68

INS

TALLER

MAINTEN

CE TECHNI

2.8 USE OF THE REMOTE ZONE

CONTROL.

The remote zone control manages the heating /

cooling system and with it one can configure the

various operation options.
The following functions apply both for the re-

mote main zone control and for any additional

remote zone controls.
- Buttons to the side of the display (2 ÷ 5 Fig.

2-1) allow to select the available functions.

- Main selector (1 Fig. 2-1) by turning it one

can select the values of the parameters. The

parameter being edited flashes, to store the

selected value press the main selector.

Once the device is powered it goes into “

off

”

mode.

2-4

Programming current day and time.

Press and

hold the “time slot ” button until the “

Cloc

”

function appears.

2-5

Select the function and adjust it according to the

current time and day.

2-6

Ignition.

Press and hold the “on / off ” button;

the remote control goes into stand-by and dis-

plays the operating modes, the room temperature

and the time.

2-7

Selection of operating mode.

By pressing the

“Mode ” button one can select the operating

mode of the system in cyclic mode between:

- “Cooling “

”, system operating in room

cooling (performed by the heat pump) and

domestic hot water production mode.

- “Heating “ ”, system operating in room heat-

ing and domestic hot water production mode.

- “Domestic hot water ”, system operating in

domestic hot water production mode only.

Time slots adjustment.

The “Time band” param-

eter enables to adjust the room temperatures in

time slots, it is possible to adjust up to a maxi-

mum of 6 time slots and the programming can

be set day by day for the whole week, for 5 days

(Mon-Fri) and 2 days (Sat-Sun).

Press and hold the “time band ” button until

the “

Cloc

” function appears, turn the main

selector until the “

Time band

” param-

eter appears

2-8

Select the function and adjust the time slots.

- Select the interval of days that one wishes to

program, the days being programmed flash.

2-9

- Select the time slots, which are shown accord-

ing to the sequence below:

Time slot 1,

Time slot 2,

Time slot 3,

Time slot 4,

Time

slot 5,

Time slot 6

2-10

Содержание 3.025499





































































Результаты поиска

Содержание 3.025499

Отзывы:

Похожие инструкции для 3.025499

Бренды по названию

Популярные бренды

Immergas 3.025499, Инструкция и рекомендации

Результаты поиска

Содержание 3.025499

Отзывы:

Похожие инструкции для 3.025499

Бренды по названию

Популярные бренды