16
SFx80_V1.1_210710_EN
Installation
and commissioning
6
Installation and commissioning
6.1
Requirements for the installation site
The machine may only be set up indoors on a level and sufficiently load-bearing surface.
Parameter
Unit
Value
Protective distances to adjacent in-
stallations
[m]
1
Permissible ambient temperature
[°C]
+15 °C to +40 °C
Permissible relative humidity
[%]
Max. 60
(non-condensing)
6.2
Setting up the machine and putting it into operation
The surface must be level and load-bearing. The work table underneath the machine must
be designed and constructed for the expected static and dynamic loads
.
The machine must be spatially arranged in such a way that, when used as intended, there
is safe assembly, operation, disassembly and a possibility for evasion.
Approach
CAUTION
Risk of injury from carrying loads that are too heavy.
•
Observe the limit values for lifting and carrying loads.
•
Use suitable lifting gear for transport.
WARNING
•
Work on live components of the machine may only be carried out by
a qualified electrician.
•
Observe applicable national standards and regulations for the electri-
cal connection of the machine.
Installation and commissioning may only be carried out by qualified personnel of the man-
ufacturer or by trained personnel authorised by the manufacturer in compliance with the
safety instructions.
