1)
Solo con le varianti 3.2, 3.3 e 3.5:
Con i tasti DOWN e UP determinare la direzione di
scorrimento dellʼeffetto (
Left
= sinistra,
Right
=
destra) e confermare con ENTER.
Le altre varianti sono già attivate con la pressione del
tasto ENTER; il display indica “
OK!
”.
2) Per modificare la direzione premere il tasto ENTER,
per scegliere una funzione differente premere il
tasto MENU.
“4. dB Mode” – Indicazione degli impulsi sonori
Sono disponibili le seguenti voci del sottomenù:
4.1 dB Random
Ordine casuale delle varianti di
effetti 4.2 – 4.8
4.2 dB_Red
Luce verde a scorrimento su
fondo rosso
4.3 dB_Green
Luce bianca a scorrimento su
fondo verde
4.4 dB_Blue
Luce bianca a scorrimento su
fondo blu
4.5 dB_Black
Luce blu a scorrimento su
fondo scuro
4.6 dB_RYG
Barre in rosso
|
giallo
|
verde
4.7 dB_Different
Barre con colori cambianti, dif-
ferenti con più apparecchi
4.8 dB_Same
Barre con colori cambianti,
uguali con più apparecchi
1) Con i tasti DOWN e UP determinare la direzione di
scorrimento dellʼeffetto (
Left
= sinistra,
Right
=
destra) e confermare con ENTER.
2) Con i tasti DOWN e UP impostare la velocità di
svolgimento “
Speed
”
per lʼeffetto e confermare con
ENTER.
3) Per modificare la velocità o la direzione premere il
tasto ENTER, per scegliere una funzione differente
premere il tasto MENU.
“5. Hold Mode” – Luce permanente
Sono disponibili le seguenti voci del sottomenù:
5.1 White
bianco
5.2 Red
rosso
5.3 Green
verde
5.4 Yellow
giallo
5.5 Blue
blu
5.6 Purple
viola
5.7 Cyan
ciano
5.8 White
bianco
1) Il colore scelto si conferma con il tasto ENTER; il
display indica “
OK!
”.
2) Per scegliere un altro colore o unʼaltra funzione pre-
mere il tasto MENU.
“6. ReSet Mode” – Reset degli apparecchi
Nel caso di funzionamento anormale, un rimedio può
eventualmente essere il reset degli apparecchi:
Chiamando la relativa voce del menù, il display
indica “
ReSet?
”
. Con i tasti DOWN e UP determinare
se gli apparecchi devono essere resettati (
YES
) o non
(
NO
) e confermare la scelta con il tasto ENTER.
Dopo il reset (indicazione: “
ReSetting, Please
Wait...
”
), gli RGBL-100T presentano una luce
bianca, mentre le impostazioni relative al numero dei
tubi e allʼindirizzo DMX non cambiano!
“7. Standby Mode” – Spegnere la luce (blackout)
Per oscurare i tubi premere il tasto ENTER; il display
indica “
OK!
”.
5.3 Funzionamento con comando DMX
Per il funzionamento attraverso unʼunità di comando
luce con protocollo DMX512 (p. es. DMX-1440 o DMX-
510USB di “img Stage Line”), lʼapparecchio dispone di
quattro canali di comando. Le funzioni dei canali e i
valori DMX si trovano nel capitolo 6.1. Se alla presa
DMX IN (7) è presente un segnale di comando DMX, il
controller lo riconosce e sul display visualizza “
DMX
Mode...
”
nonché lʼindirizzo di start DMX attuale
(
Addr: XXX
).
Lʼindirizzo di start è lʼindirizzo del primo canale
DMX ed è determinato per poter comandare lʼappa-
recchio con unʼunità di comando luce. Se, per esem-
pio, sullʼunità di comando è previsto lʼindirizzo 17 per
la scelta del modo di funzionamento, si deve impostare
sul RGBL-100C lʼindirizzo di start 17.
Le altre funzioni dellʼapparecchio saranno asse-
gnati automaticamente agli indirizzi successivi (nel
nostro esempio 18 – 20). Il prossimo indirizzo di start
possibile per lʼapparecchio successivo con comando
DMX, potrebbe essere nel nostro esempio lʼindirizzo
21.
Per modificare lʼindirizzo start DMX:
1) Chiamare la voce del menù “
1. SystemSet
”
(sce-
gliere con il tasto MENU e confermare con il tasto
ENTER).
2) Con i tasti UP e ENTER, chiamare la voce del sot-
tomenù “
1.2 DMX512 Addr
”
.
3) Con i tasti DOWN e UP impostare lʼindirizzo di start
e confermare con il tasto ENTER.
4) Premere il tasto MENU, con il tasto UP scegliere la
voce “
1.3 Enter DMX?
”
e confermare con il tasto
ENTER.
Il display indica ora “
DMX Mode...
”
nonché il nuovo
indirizzo di start.
Se durante il funzionamento con DMX, una fun-
zione è stata comandata manualmente tramite il menù
dellʼRGBL-100C, per ritornare nel funzionamento
DMX chiamare nuovamente la voce del menù “
1.3
Enter DMX?
”
.
18
I