Note:
It will also be possible to activate / deactivate the
effect with the button BYPASS / F2 while its LED keeps
flashing. For this purpose, simply press the button briefly.
To return to the selection of the first two parame-
ters, keep the button BYPASS / F2 pressed again
until its LED stops flashing.
Chorus/ Del:
The effects Chorus and Delay are
activated at the same time. The frequency of the
Chorus vibrato is adjustable with the control FX
VARIATION (
Chorus).
6.6 Pitch Shifter
The pitch of the input signal is shifted. The shifting
is adjustable in steps with the control FX VARIA-
TION (5):
0 = pitch decreased by 1 octave approx.
5 = no shifting
10 = pitch increased by 1 octave approx.
To hear only the signal with the pitch shifted, set the
control MIX (3) to EFFECT, e. g. to distort a voice
substantially.
7 Specifications
Frequency range: . . . . . 20 – 20 000 Hz ±0.5 dB
Mono input
Input voltage: . . . . . . 2.2 V max.
Connection: . . . . . . . 6.3 mm jack, unbal.
Stereo output
Output voltage: . . . . . 2.2 V max.
Connections: . . . . . . 6.3 mm jack, unbal.
S / N ratio: . . . . . . . . . . . > 90 dB
THD: . . . . . . . . . . . . . . . < 0.01 %
A/D and D/A converter
Quantization: . . . . . . 20 bits
Effect processor
Quantization: . . . . . . 24 bits
Power supply: . . . . . . . . 9 V~
via power supply unit
provided and connected
to 230 V~ / 50 Hz
Ambient temperature: . . 0 – 40 °C
Dimensions: . . . . . . . . . 140 × 45 × 125 mm
Weight: . . . . . . . . . . . . . 650 g
Subject to technical modification.
LED of button BYPASS / F2
flashing
LED of button TAP/ F1
adjustable parameter
not lighting up
ratio between echo effect
and reverb effect
lighting up
reverb decay time
11
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means for any commercial use.
GB
