IMG STAGE LINE BEAM-20LED, Инструкция по эксплуатации

Страница: 17 / 28

15
Built-in Programs Mode
You can select 4 different Programs when using the BEAM-20LED .
1) Press MODE until the display shows , then press ENTER to open the menu and change your
settings.
2) Use the UP / DOWN buttons to select one of 4 programs.
DMX Advanced/Basic Mode
1) When the display shows : , press ENTER to open the menu and change your settings.
2) When the display shows : , the device has 12 Channels.
3) When you press Up/Down, the display will show . The device now has 9 channels.
Auto Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows : , press ENTER to open the menu and change your settings.
3) You can choose one of 16 built-in programs by pressing the Up/Down buttons.
Sound-controlled Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows : , press ENTER
.
3) The device is now sound-controlled and will react to the music.
Slave Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows : , press ENTER.
3) The device is now a slave device. It will now react the same as its master.