imex Bullseye 80, Руководство пользователя

Страница: 15 / 20

14
History storage
Press this button twice and the previous 30 results (measurements or
calculated results) are shown in reverse order.
and buttons can be used for navigation.
Press this button to use the result from the summary line for further
calculations.
Timer
Press and hold down this button to set a 5-second time delay.
By using and button, you can adjust the value until the desired
time delay reached.
Once the key is released with the laser activated, the remaining seconds
until measurement (e.g. 59, 58, 57...) are displayed in a countdown. The last
5 seconds are counted down with a beep. After the last beep the
measurement is taken and the value is displayed.
Tilt sensor calibration
You can calibrate the tilt sensor in the device. Calibration requires two
measurements on a level surface.
Carry out 1st measurement on a level surface. Press to confirm the
measurement.
Rotate the device horizontally through 180°.
Carry out 2th measurement on a level surface. Press to confirm the
measurement.
The tilt sensor is calibrated with the result on the
Summary line.