imex 77R, Руководство по эксплуатации

Страница: 11 / 20

4. Scan Mode Operation (88R & 88G only)
The scan mode function allows the laser beam to emit
only in a restricted radius.
This function is useful for;
- Internal layout work where work is being carried out in
single runs or sections i.e. wall or ceilings
- On restricted sites internal or external where other laser or
electrical equipment may be in use
- On busy sites where eye safety with other workers may be
an OH & S issue
- On single long external runs i.e. pipe laying where full 360º
is not required
- Especially useful in vertical mode 180º operation
4.1 Operating the Scan
With the unit on, press the scan button (h). Set the width
required 0º, 10º, 45º, 90º or 180º by pressing the button
once for every scan width increment.
To change the direction or position of the scan use the left
spinning and right spinning buttons (a and b). Press either of
these buttons until the desired position is reached.