OPERATION MANUAL PAGE
4
touch them when opening and closing the door.
⚫
Do not immerse the heater. If a drop of water gets into the heating element from the connecting part,
it may cause a short circuit or other defects.
⚫
When hot, do not apply water to the glass window. It may cause the glass to break.
⚫
Do not touch any place except for the handle and switch during heating, otherwise you can suffer burns
since the body is very hot.
⚫
If the oven has been submerged due to a disaster or other problem, replace all electric parts and wiring.
Otherwise, electrical shock or fire can be caused.
⚫
Maintain the contents products with the food hygiene laws.
Inappropriate daily hygiene maintenance can cause accidents.
⚫
Consult a specialty repair shop or the store where you purchased the oven for repairs.
Incomplete repairs can cause electrical shock, burns, fire or stumbling.
⚫
If the earth leakage breaker operates frequently, consult a specialty repair shop or the store where you
purchased the oven for repair.
If you continue to use the oven without repair, electrical shocks or files can be caused.
⚫
Do not disassemble the oven; otherwise accidents can be caused.
⚫
When removing dirt on the oven, do not use chemicals, such as thinner or benzine; otherwise accidents
can be caused.
⚫
Do not stack the oven by three or more heavy (120Kg(280lb)); otherwise stumbling accidents or injuries
can be caused.
⚫
Clean the inside of the storage daily; otherwise defects or bad smell can be caused.
⚫
Note that some extra steam may be released from a drainage pipe behind the oven (for YSD-2A,
YSD-4A).
⚫
The unit is equipped with a micro-switch. When the door is opened, the motor fan would stop working.
2. Purpose of Using the Oven
The oven was designed only to be used baking cakes, pies, cookies, poultry, beef, pork, bread, steak, etc.
Do not use for other purposes.
Do not warm up carbonated drinks in cans or bottles; otherwise the containers can explode, causing
injuries.
3. Using the Oven
3.1 Preparations before using
①
Feet assembly
⚫
The feet are placed inside the appliance and must be assembled. Do not use the appliance without
feet.
⚫
Screw the support feet to the bottom of the appliance.
⚫
Adjust the appliance height by screwing or unscrewing the feet themselves.
②
Positioning
⚫
Install the oven on a flat and solid surface.
③
Remove the protective film.
④
Take out the tray from the body and wash it.
⑤
Wipe the inside and outside of the oven with a damp cloth. Then, wipe with dry cloth.
⑥
Electrical connection
