6
and do not tamper with it. Any repairs must only be
carried out by an authorised technical service centre.
• If the power cable is damaged it must be replaced by
an authorised technical service centre, so as to prevent
all risks.
• The device must only be used on human hair. Do not
use the device on animals or on wigs made of synthetic
material.
• Use a dry cloth to clean the appliance.
Do NOT spray hairspray while the appliance is
switched on. There is a risk of fire.
SYMBOLS
Warning
General prohibition
Class II appliance
GENERAL INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to page I of the Illustrative Guide to check the contents of the package.
All the figures are on the inside pages of the cover.
1.
LED display
2.
Button lock activation LED
3.
Plate closing lock
4.
Power cable
5.
Button (off/on)
6.
Temperature adjustment buttons (+
and - buttons)
7.
Heating plates
8.
Technical data
For the appliance features, refer to the external packaging.
Use the supplied accessories only.
USEFUL TIPS
A quick understanding of how to use the hair straightener will allow you to establish the exact
application time to achieve the desired effect on your hair.
•
Ensure your hair is dry, clean and without any trace of hairspray, hair mousse or gel.
•
Comb your hair ensuring there are no knots. Start straightening from the nape of the neck,
proceed on the sides and finish on the forehead.
•
During use, when the plates heat and cool, position the appliance on a smooth and heat
resistant surface.
•
While straightening, be careful not to near the plates too much to the sensitive parts of the
face, ears, neck or head.
•
Leave the plates to cool down completely when finished, before putting the appliance away.
USE
PREPARING YOUR HAIR
•
Wash hair as normal and comb to remove knots.
•
Dry your hair and brush from the roots to the ends.
INSTRUCTIONS FOR USE
•
Connect the plug (4) to the mains.
•
Press the button (5). The LED display (1) lights up.
•
Select the desired temperature between 150°C and 230°C, depending on the type of hair
and the desired effect; the temperature can be adjusted at any time by pr or - (6).
•
After having selected the desired temperature, the button lock can be activated by pressing
the button (5) twice and quickly. This function prevents accidental temperature changes
while using the straightener. The activation of the button lock is signalled by the LED (2)
going on; the lock can be deactivated by pressing the button (5) twice once again.
•
The LED display (1) flashes until the plates reach the set temperature.
•
Once the temperature is reached, the LED display (1) remains on.
•
Take a thin lock of hair, which is the same width of the plate and not too voluminous, and
EN
