IMET Spa BS 300 PLUS SH, Инструкция по эксплуатации

Страница: 18 / 53

INSTRUCTIONS FOR USE
BS300 Plus SH ED.2010 rev.00 18/53
12 - MACHINE DESCRIPTION, E.C. SAFETY NORMS, PROPER USE
Bandsaw for mitre cutting from 45° right to 60° left of metal profiles and solids.
The SH model allows to
perform semiautomatic cuts (without air supply is possible to use it as a manual machine) . The
emergency RED/YELLOW switch allows to stop the saw at any time, especially when performing automatic
cuts.

It is not suited to cut wood and assimilated materials (see D.M. 2006/42/CE, enclosure I,
paragraph 2.3)
As a manual machine, the following operations have to be done manually: material clamping, sawframe drop
and cut, sawframe return, material unclamping and feeding for a new cut.
The blade start is controlled by the button inside the handle, which has a safety guard to prevent unintentional
starts.
The Machine Directives and the Norms applied when designing and manufacturing this bandsaw are
mentioned in the enclosed Declaration of Conformity.
From the working position, in front of the vice, the operator has the possibility to activate all drivers and check
the correct working of the machine, as well as to avoid risky areas.
In the following paragraphs you will find all information to use the machine in the best way and for a very long
time.
The choice and the use of the parts have been made by considering the conditions of use and the long
machine life.

1.1 - APPENDIX FOR E.M.C.
The structure of this machine is complying to the protection requirements of the EEC Directives 89/336/EEC,
92/31/EEC and 93/68/EEC in terms of Electromagnetic Compatibility (E.M.C.).
BS 300 PLUS SH