E211101X_rev02_ENG
29/06/2022
7
The packing material must not be spread on the environment but must be collect in the appropriate collecting place in
compliance with the country rules in force.
ATTENTION!
Remove the transport clamps following with care the instruction inside the machine side. Pallet and clamps must be
stored in case the ironer should be moved in the future.
THE MACHINE MUST NOT WORK IF IT IS STILL ON THE PALLET!
Complete the machine positioning mounting the following parts, which are supplied with machine in the same package:
Above collecting slide (all the machines)
Below collecting slide (only machine without folding system)
Front and back collecting tables (only machines with folding system)
touch screen (only machine with folding system). In this case, after the mechanical parts has been mounted, the touch
screen must be electrically connected:
connecting the supply plug.
connecting the PLC.
ATTENTION!
hand carefully the touch screen during all the operation of unpacking, mounting, and connecting.
5.
MACHINE IDENTIFICATION
The drying ironer is identified by a label with serial number, model, power, and technical characteristics. In order-to-
order spare parts or request technical assistance the correct machine identification is necessary.
If this label has been modified, damaged, or removed the machine cannot be correctly identified, so any installation or
maintenance operation is difficult, and the warranty automatically expire.
6.
POSITIONING AND INSTALLATION ROOM
Installation must be operated by qualified personnel. The machine must be positioned in a flat surface horizontally and
in a very steady way, using the adjustable feet on the ironer side base.
