E211101X_rev02_ENG
29/06/2022
28
-
THERMAL MOTOR
There is a thermal motor signal when there is a failure of the inverter that powers the motor that drives the roller. The
machine activates the cool down and turns on the vacuum cleaner (where present).
Once the cool down temperature is reached, the machine turns off: the display remains the alarm that can be reset by
turning off the machine. Call the Technical Support service.
-
POWER ON SAFETY RESET BUTTON
Below the touch screen is the SAFETY RESET button of the safety system. This system intervenes, illuminating the
button, when one of the following events occurs:
-
intervention of the hand-saving bar
-
opening of one of the side doors
-
pressing the emergency button
Safety is restored by pressing the SAFETY Reset button.
If the light does not turn off, the alarm is not reset.
It means that at least one of the elements listed above has not yet been restored, and that the machine is still on standby,
waiting to return to safety conditions.
-
SAFETY THERMOSTAT ACTIVATION
It is possible that the safety thermostat has intervened.
In this case it is necessary to rearm it. Make sure that the roller temperature is below 80°C. Turn off the machine and
disconnect all power supplies. Open the left door and find the safety thermostat. Unscrew the black cap and press the
white button inside it.
Finally, screw the black cap back on and close all the doors.
33.
PROGRAMMING
It is possible to perform a series of changes to the default data by entering the user menu.
To log in, while the machine is stationary press the ":" menu icon at the top right.
The screen appears on the display:
