E170301x.03_EN
29/06/2022
8
To get the grille off the pallet, use two steel bars with the smallest diameter of 20 mm and a length of at least 800 mm,
passing them through the prepared holes. Then harness the machine and lift it perfectly vertically.
Lift the machine with the forklift and remove the pallet: finally place the machine in the final position.
The packaging materials must not be dispersed in the environment and must be stored in the proper collection spaces,
according to local regulations in force.
ATTENTION!
Proceed to the disassembly of any transport stops following the instructions inside the shoulders of the machine.
Care should be taken to store pallets and transport stops for any future movement of the machine to other
locations.
NOTE: The machine must not be left on the pallet!
Once the machine positioning operations have been completed, the following parts have been mounted on the proper
supports, delivered in the same packaging, but disassembled:
-
top collection chute
-
lower collection chute
5.
MACHINE IDENTIFICATION
The equipment is identifiable by an adhesive plate bearing the serial number, model, power, and technical
characteristics. Spare parts and / or interventions presuppose the exact identification of the model for which they are
intended.
