E170301x.03_EN
29/06/2022
6
The operator, when introducing the fabric into the machine, must not go with it under the hand protection. The
fabric must be flattened on the entrance table, here ripples or bends must be eliminated; therefore, the fabric
must be gone with on the introduction bands that will drag it between the roller and the ironing bands.
It is forbidden to iron fabrics folded into several layers or several layers of overlapping fabric.
On the machine, in correspondence with the hand protection is affixed the following plate that must be replaced
with another identical one in case the same has been damaged or removed.
In order to avoid sunburn or crushing of the limbs, it is absolutely forbidden to remove, even temporarily, the
protection panels and security systems!
ATTENTION!
It is forbidden to introduce bars, slats or metal objects between the ironing bands and the roller. If an
emergency, always perform the procedures described in the relevant paragraphs.
ATTENTION!
Always check the correct functioning of the safety devices at each start of the machine, following the procedure
in the relevant paragraph.
ATTENTION!
It is mandatory to understand the logic of operation of the emergency
buttons!
CAREFULLY READ AND INFORM ALL OPERATORS ABOUT THE INTERVENTION SYSTEMS IN
CASE OF SUDDEN POWER FAILURE OR IN CASE OF ENTRAPPING: CHECK THE POSITION OF THE
UNLOCKING SYSTEMS!
ATTENTION!
These warnings do not cover all possible risks. The user must therefore continue with the utmost caution in
compliance with the rules.
