E190601X rev.6_ENG
May 30, 2022
6
LIGHTING!
In the room where the machine is installed, there must be uniform illumination of intensity 300-500 lux, annoying
glare must also be avoided.
ATTENTION!
These warnings do not cover all possible risks. The user must therefore proceed with the utmost caution in
compliance with the rules.
3. RESPONSIBILITY OF THE MANUFACTURER
The instructions in this manual do not replace but supplement the obligations for compliance with current
legislation on safety and accident prevention standards. With reference to what is reported in this manual, the
manufacturer declines all responsibility in the event of:
-
use of the machine contrary to the laws in force on safety and accident prevention.
-
incorrect installation of the machine.
-
lack of periodic and scheduled maintenance
-
failure or incorrect observance of the instructions provided in the manual.
-
defects in voltage and mains supply.
-
unauthorized modifications to the machine.
-
use of the machine by unauthorized personnel.
4. TRANSPORT, STORAGE AND UNPACKING
The machinery must be transported and stored in rooms where temperature and humidity do not exceed the
following values:
-
TEMPERATURE: -10°C / +50°C.
-
RELATIVE HUMIDITY: max 90% without condensation.
The storage of the machine in environments and methods different from those indicated above can compromise
the electronic components contained within it.
It is recommended to check the machine upon receipt, taking care to report to the carrier any damage caused
during transport, both to the internal components and to the external bodywork.
The machine must be completely unpacked near the place of installation.
The packaging materials must not be dispersed in the environment and must be stored in the appropriate
collection spaces according to current regulations.
Remove the fixing bolts to the pallet with a wrench.
ATTENTION!
Check on the technical sheet, attached to the machine documentation, the net and gross weight: check the
compatibility with the available lifting equipment.
ATTENTION!
The pallet should not be used as a normal machine holder! The machine must always be taken off the pallet and
positioned as described in the relevant paragraph.
ATTENTION!
The machine must be moved only when it is fixed to its pallet: the handling through the forklift must be carried
