E190601X rev.6_ENG
May 30, 2022
22
Temperature. maximum 70°C; normal
mechanical action
Temperature. maximum 60°C;
reduced mechanical action
Temperature. maximum 40°C; very
reduced mechanical action
Hand wash only
Do not wash in water
18. LOAD THE MACHINE AND CLOSE THE OBLO'
The machine must be loaded according to the characteristics shown on the serial label. The label is glued to the
back of the machine itself.
ATTENTION!
The machine must be loaded with linen as homogeneous as possible and with a weight that does not exceed
that required by the technical sheet and matriculation label.
Before carrying out the loading with dry linen, make sure that the basket is completely empty. After loading the
machine, close the porthole.
ATTENTION!
Make sure that when closing the porthole, no flaps of fabric are pinched between the porthole and the front of
the machine.
For machines with impulse closure, simply press the porthole until it locks.
For machines equipped with motorized closure, the porthole must only be placed on the front, so that the closing
thy is welcomed by its seat on the front.
At the start of the cycle, the machine will give the control of the tight tightening of the motorized closure.
ATTENTION!
For barrier washing machines (double door): before closing the external porthole, make sure that the internal
door has been closed correctly, according to the procedures indicated with a special notice on the machine
itself.
In case of incorrect closing of the inner door, the cycle MUST NOT be started.
Make sure that the operators have well understood the instructions on closing the inner door on board the
machine!
19. MANUAL OPENING OF THE OBLO'
During the execution of the cycle, it may be necessary to open the porthole manually, without the aid of unlocking
via keyboard.
ATTENTION!
Before carrying out the manual procedure, disconnect the power supply from the main switch.
