IMD SF104x, Руководство пользователя

Страница: 10 / 36

PRELIMINARY
SF104-P01
SF3013M Fingerprint Image Sensor Module User Manual Page - 10
command code name function read/write
0x01 rdata read pixel data R
0x02 start start scan W
0x03 status read status R
0xC0 srst software reset W
0x20+N rread read register R
0x40+N rwrite write register W
For the rread and rwrite command, the number N is the register address. The effective
N is in the range of 0x00 to 0x11.
The register content is summarized in the following table:
N Address Name Function RW
Default
Value
7 6 5 4 3 2 1 0
0 0x00 reg_clk clock control RW 0
1 0x01 reg_pag pag control RW 0 en_test1 en_test0
2 0x02 reg_dcoc dc offset RW 0
3 0x03 reg_adc adc setting RW 0
4 0x04 reg_otp_addr OTP address RW 0
5 0x05 reg_otp_wdat OTP wirte data RW 0 otp_wd
6 0x06 reg_otp_mode OTP control RW 0 otp_prg otp_rst otp_ceb
7 0x07 reg_otp_rdat OTP read data RW
8 0x08 reg_deth finger detection threshold RW 0xFF
9 0x09 reg_ddiv clock divider for detection RW 0
10 0x0A reg_enab function enable bits RW 0 en_window en_inscan en_det en_sqwv lowcap en_osc en_analog
11 0x0B reg_mode mode control bits RW 0 en_intr
12 0x0C reg_llx windowing function setting RW 0
13 0x0D reg_lly windowing function setting RW 0
14 0x0E reg_urx windowing function setting RW 0x9F
15 0x0F reg_ury windowing function setting RW 0x9F
16 0x10 reg_chmd change mode W (N/A) ch_mode
17 0x11 reg_inscanline in scan detection line number RW 0x40
Reserve
Internal test
otp_rdat
test1 test0 div_opclk
pga2_gain pga1_gain
dc_offset
adc_bias adc_vrt adc_vrb
otp_yp
otp_ain
ury
in_scan_line
deth
ddiv
en_bits
llx
lly
urx