IMC VENTUS V135, Инструкции по установке, эксплуатации и обслуживанию

Страница: 10 / 25

Page | 10
CHANGING AN LED LIGHT FITTING
The cabinet interior is illuminated by a LED light strip fitting located at the front
of the top inner panel.
To change the light assembly:

Ensure the mains power to the unit has been turned off.

Open the front cabinet door(s).

Unscrew the screws holding the LED assembly in place.

Carefully lower the LED assembly down and disconnect the 2 wires from the
unit.

The LED light assembly should now be free to fully remove from the unit.

To fit the replacement unit.

Place the new LED light assembly inside the unit, re connect the 2 wires
from the unit to the new LED light assembly.

Re fit the LED light assembly inside the unit by using the screws.

Re-connect the mains power and ensure the light illuminates by means of
the ECO switch.
LED Light
Assembly
crews
Fixing
Screws &
Washers
Fixing
Screw &
Washers
LED Light
Assembly
ews