imagistics im6530, Руководство по эксплуатации, Страница: 4 / 184

2
EPA
E
NERGY
S
TAR ® (MFD)
The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the
E
NERGY
S
TAR Program, to encourage the widespread and voluntary use of energy-efficient technologies
that enhance the workplace, improve product performance and prevent pollution. As an
E
NERGY
S
TAR
Partner,
Imagistics
has determined that this copier model meets the
E
NERGY
S
TAR guidelines for energy
efficiency.
E
NERGY
S
TAR guidelines for this class of copier require
E
NERGY
S
TAR copiers to have an 'Off Mode'
feature that automatically turns the copier off after a period of inactivity, ensuring night and weekend shut-
off. The copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after a period
of time since the last usage.
For Printer models,
E
NERGY
S
TAR guidelines require
E
NERGY
S
TAR Multifunction copiers to
have a 'Sleep Mode' feature that automatically makes the copier enter the sleep mode after a period of
inactivity. The copier must also automatically change to a 'Low Power Mode' (Automatic Energy Save) after
a period of time since the last usage.
Specifically, this copier complies with the following requirements ––––
im8130/im6530 Copier model (Base model)
'Off Mode'-
The copier consumes less than 20 watts in the 'Off Mode'.
'Off Mode' Default Time-
The default time for the 'Off Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 255 watts (im6530)/316 watts (im8130) while in Energy
Save Mode.
'Automatic Energy Save' Default Time-
The default time before switching to 'Automatic Energy Save Mode' is 15 minutes.
im8130/im6530 Printer model (Multifunction model)
'Sleep Mode'-
The copier consumes less than 95 watts in the 'Sleep Mode'.
'Sleep Mode' Default Time-
The default time while in 'Sleep Mode' is 90 minutes.
'Automatic Energy Save'-
The copier consumes less than 300 watts (im6530)/361 watts (im8130) while in Energy
Save Mode.
'Automatic Energy Save' Default Time-
The default time before swtching to 'Automatic Energy Save Mode' is 15 minutes.
Note1- The default setting for the 'Off Mode' or 'Sleep Mode' and 'Automatic Energy save' can be
changed.
Note2- To restart the copier after auto shut off, turn on the power switch. To restart the copier after
sleep mode, press the start key.
Note3- In the sleep mode, if printer data is received, or the start key on the control panel is pressed,
the copier starts warming itself up and prints out the data when it becomes ready.
If you have any questions regarding the use of recycled paper or some recommended types of
recycled paper, please contact your authorized Imagistics dealer.
E
NERGY
S
TAR is a U. S. registered mark.
00-WARNING.P65 5/16/03, 11:20 AM 2