imagistics im6530 Скачать руководство пользователя страница 109

Страница: 109 / 184

5-17

Turn ON the power switch once again when the copier is in the off-mode. Press the

START key during

the sleep mode. The copier starts to warm itself up.

Clearing the Off-Mode/Sleep Mode

Press the PROGRAM key to enter the program

menu, and press the AUTO SHUT OFF key.

- If the desired function keys are not displyed, press the Next

key to change the menu screen.

When the power of the optional printer controller is ON, the copier goes into the sleep mode which stands by
with the minimun power consumption.

Select the period of time (in minutes) on the display

allowed before the Off-mode (the Sleep mode if

the power is being supplied to the optional printer

controller) is activated.

- The setting procedure finishes and the display returns to the

program menu screen.

- The default setting is ‘90 minutes’.

9. SETTING THE AUTOMATIC OFF-MODE

05-SPECIALFUNCTIONS.P65

5/15/03, 7:17 PM

Содержание im6530

























































































































































































Результаты поиска

Содержание im6530

Отзывы:

imagistics im6530, Руководство по эксплуатации, Страница: 109 / 184

Результаты поиска

Содержание im6530

Отзывы: