Imagine Selenio X50, Инструкция по установке и эксплуатации, Страница: 63 / 136

X50
Installation and Operation Manual
49
Proc
Bypass
Proc Bypass is an option found in the SDI1 Out Format and SDI2 Out Format
parameters. In the X50, this function bypasses the scalar and all processing (noise reduction,
detail enhancement, color correction, etc.) but is downstream of the frame synchronization.
Output Format Selection
The SDI Routing Mode selects whether the SDI 2 output is independent or linked to SDI 1
(This setting also affects the available output formats for SDI2, Analog, and HDMI.)
I-Wings and 3D Modes
The default operation of the X50 is the Normal mode, found at Video > Operation
Mode . Other Operation Mode options include I-Wings and various 3D controls.
To enable the I-Wings mode on the X50, select Live I-Wings . When operating in this mode,
video from SDI 1 and SDI 2 input forms into one video stream. The SDI 1 input remains in
the foreground, while video from SDI 2 input becomes the background (the “wings”).
The 3D mode is enabled by selecting 3D Left/Right or 3D Top/Bottom . When the X50 is
operating in a 3D mode, SDI 1 and SDI 2 input video forms into one frame-compatible video
stream for side/side or over/under (half resolution) 3DTV signals.
In both I-Wings and 3D modes, frame sync and color corrector processing blocks are
bypassed.
To undo a 3D function, select 3D Undo Left/Right (1080i) or 3D Undo Top/Bottom
(720p) . When you select either of these options, the side/side or over/under 3D signal can
be converted to left eye and right eye signals.
Note: 3D Undo Top/Bottom for 1080 output standards is not supported at this time.