Imagine Selenio 6800 HUC6801+D, Инструкция по установке и эксплуатации

Страница: 59 / 62

HUC6801
+
D
Installation and Operation Manual
47
Copyright 2010, Harris Corporation
+
Pilot Lite and CCS software see the frame, but do not find all of the
modules
Solutions
„
Remove any legacy 6800 series products.
„
Plug your modules in before starting the discovery.
„
Start your discovery after the frame and all modules have fully powered up.
„
Refresh
+
Pilot Lite ( File > Refresh ), and ensure that the installed modules are fully
powered up first before discovery.
+
Pilot Lite and CCS Pilot/Navigator do not respond after they have been
launched.
Solution
Close either
+
Pilot Lite or CCS Pilot/Navigator. Both programs cannot be running at the
same time on the same PC.
+
Pilot Lite and CCS software show a module in the control window, but
cannot control it.
Solution
1 Set the module’s Local/Remote jumper to Remote.
2 Ensure the module name in the Control window matches the module type in the frame.
3 Gently push the module into its slot in the frame to ensure it is seated properly and
powered up.
4 Verify that the Control window indicates the device is ready.
Hardware Communication Problems
After a power failure, the frames and PC do not communicate.
Solution
1 Wait four minutes for the frames to recover from the power failure.
2 Close the
+
Pilot Lite or CCS software, and then restart the PC.
3 Restart the software application.