Imagine Selenio 6800 HUC6801+D, Инструкция по установке и эксплуатации

Страница: 38 / 62

Chapter 3
Configuration and Operation
26
Copyright © 2010, Harris Corporation
Setting Audio Pair Delay
You can configure audio delay (in msec) for each audio channel pair to compensate for any
upstream video processing. Audio pair delay is added before audio embedding and is
additive to the delay set by the
Input Frame Delay parameter (see Synchronization and
Delay on page 17).
To set audio pair delay make the following selection:
Setting Audio Pair Gain
You can set audio gain for PCM (uncompressed) output audio channel pairs before they are
embedded in the output SDI stream. To set audio gain, make the following selections:
Setting Description Parameter Navigation
Set the audio delay for Audio Pair
1 to Audio Pair 4. Audio Setup Processing Audio Pair 1 Delay to
Audio Pair 4 Delay
[
2 , C to 2 , F ]
(select a delay value)
Setting Description Parameter Navigation
Set the audio gain for Audio Pair
1 to Audio Pair 4. Audio Setup Processing Audio Pair 1 Gain to
Audio Pair 4 Gain
[
2 , 8 to
2
, B ]
(select a gain value)