Configuration and Status Parameters
December 3, 2008
H A R R I S C O R P O R A TI O N
| I P A 68 0 0 + A S I O N I P V I D E O G A T EW A Y
Release 1.2.0 | Page 28
6.2 Parameters
6.2.1 How To Use Telnet
1
On a Windows PC, click the ‘Start > Run’, type the following and press ‘Return’ to open a DOS dialog box.
cmd
2
Begin a Telnet session by using the system’s IP address and typing the following into the DOS dialog box.
telnet <system IP Address>
3
The system prompts for a username and password. The following username and password are factory defaults.
username: admin
password: admin
4
Once a Telnet connection is established, commands listed in the following sections can be directly executed.
6.2.2 Parameter Usage Notes
Many of the the ‘Command Paths’ in the following sections depict a range of values in square brackets ‘[ ]’.
Configuration/Encapsulator_[1–2]/FEC Type
Substitute one value from the range to create a command string.
Configuration/Encapsulator_1/FEC Type
Configuration/Encapsulator_2/FEC Type
Add an equals sign ‘=’ and value from the ‘Options’ column to complete the command string.
Configuration/Encapsulator_1/FEC Type=low
Configuration/Encapsulator_2/FEC Type=high
Table 6-1 Remote Control Parameters
Command Path
Description
Options
Default
Configuration/Ethernet
Configuration/Ethernet/Link
Specifies the Ethernet interface's link speed.
auto, 10, 100, 1000
auto
Configuration/Ethernet/IP Address
Specifies the Ethernet interfaces's IP address
IP Address
192.168.1.1 (default)
0.0.0.0
Configuration/Ethernet/IP Mask
Specifies the Ethernet interface's IP mask.
IP Address
255.255.255.0 (default)
0.0.0.0
Configuration/Ethernet/IP Gateway
Specifies the Ethernet Interface's IP gateway address.
IP Address
0.0.0.0
Configuration/Control
Description
Options
Default
Configuration/Control/Password
Specifies the password protecting the module's control interfaces.
31-char
admin
Configuration/Control/Telnet
Enables/disables the module's Telnet interface.
enable, disable
enable
Configuration/Encapsulator_[1–2]
Description
Options
Default
Configuration/Encapsulator_[1–2]/Input
Enables/disables the specified encapsulator input and input type.
OFF, AUTO, ASI,
off
Configuration/Encapsulator_[1–2]/FEC Type
Specifies the level/type of FEC to apply to outgoing data.
None,
LOW, MEDIUM, HIGH,
CUSTOM
low
Configuration/Encapsulator_[1–2]/Dest
Description
Options
Default
Configuration/Encapsulator_[1–2]/Dest_[1–4]/IP Address
Specifies the IP destination address.
0.0.0.0
(disables destination)
0.0.0.0
Configuration/Encapsulator_[1–2]/Dest_[1–4]/Port
Specifies the IP destination port.
0–65535
0
Configuration/Encapsulator_[1–2]/Dest_[1–4]/TOS
Specifies the Type of Service (TOS) byte.
0–15
0
Configuration/Encapsulator_[1–2]/Dest_[1–4]/TTL
Specifies the packet Time To Live (TTL).
1–255
16
Configuration/Encapsulator_[1–2]/ASI FEC
Description
Options
Default
