Operation
December 3, 2008
H A R R I S C O R P O R A TI O N
| I P A 68 0 0 + A S I O N I P V I D E O G A T EW A Y
Release 1.2.0 | Page 24
5.3 General Operating Procedures
5.3.1 How Parameter Changes are Applied
Observe the following when setting the configuration parameters on the :
•
Parameter changes take immediate effect. However, the module requires up to 30 seconds to save the latest change.
•
After 30 seconds, the new settings are saved. Once saved, these will be restored in the event the module loses power or is restarted.
5.3.2 How to Check Hardware and Software Versions
Use +Pilot or Navigator to determine the module’s current hardware or software version.
See the
RCP-CCS-1U Installation and Operation Manual,
CCS software application user manual
,
or CCS software application online help for
information on viewing software and hardware version numbers.
