Imagine HOMS+OP+, Инструкция по установке и эксплуатации

Страница: 40 / 63

26 HOMS
+
OP
+
and OHDS
+
OP
+
Installation and Operation Manual
Chapter 3: Operation
Setting Parameters
HOMS
+
OP
+
Table 3-3 (below) and Table 3-4 on page 28 list the available
HOMS
+
OP
+
parameter options (four-channel and eight-channel,
respectively). You must use CCS-enabled software or control panels to
access most of these parameters (
Transmitter Enable can also be
controlled at the card-edge). Using CCS, you can also view the current
firmware and hardware versions of the module. Values with an asterisk
indicate the default setting. [RO] indicates the parameter is read-only.
Table 3-3. HOMS
+
OP
+
Parameters (Four-Channel L4 and U4 Versions)
Parameter Name Function Options
Ch-x Reclock Mode Sets the data rate for inputs 1 to 4
• Auto*
• 143
• 177
• 270
• 360
• 540
• HD
• Bypass
Ch-x Locked Rate [RO] Displays the data rate for inputs 1 to 4
• Unknown
• 143
• 177
• 270
• 360
• 540
• HD
Ch-x ASI Mode Enables DVB-ASI locking in the Auto mode for
inputs 1 to 4
• Disable
• Enable*