Imagine ADC-A12C31, Инструкция по установке и эксплуатации

Страница: 13 / 39

ADC-A12C31 Operator’s Handbook Rev. A P. 12
Mounting
The ADC-A12C31 analog clock is designed for wall mount. Power and low voltage signal wiring should
be installed according to local electrical codes, so to access the back of the clock.
Do not route power or signal cables between the case and the wall (along the exterior of the
wall), which may pinch the power or signal cable and create a hazardous condition.
A mounting bracket is supplied which has been designed to fit on either a standard 2”x 4” or 4” x 4”
conduit box. Mount the bracket on the wall/conduit box, attach the time code cable and secure the
clock to the bracket using the supplied retaining screw.