Imagine communications Selenio 6800 HUC6800, Инструкция по установке и эксплуатации, Страница: 52 / 84

38 HUC6800
+
Installation and Operation Manual
Chapter 3: Operation
0, B Output H Phase Sets the horizontal phase for the output
signal
• 0 to 1979 pixels
(720p/50 Hz)
• 0 to 1649 pixels
(720p/59.94 Hz)
• 0 to 2639 pixels
(1080i/50 Hz)
• 0 to 2199 pixels
(1080i/59.94Hz)
0, C Output V Phase Sets the vertical phase for the output signal •
0 to 749 (720p)
• 0 to 1124 line (1080i)
0, D Genlock Source Selects the Genlock source
(When the video input source is HD-SDI,
this parameter defaults to Delay, because
there is no external/frame reference for the
HD signal as it bypasses the processor.)
• External Ref
• Frame Ref
• Free Run
• Delay
0, E Reference Video Standard Selects the reference standard
(The applicable 525 or 625 options are
displayed in the OSD; if the standard is
mismatched with the genlock source, the
Reference LED will light.)
• Auto
• NTSC/PAL-M
• TLS 720p59.94
• TLS 1080i59.94
• PAL-B
• TLS 720p50
• TLS 1080i50
0, F Factory Recall Recalls the factory default settings
• No
• Yes
Bank 1
1, 1 EDH Error Poll Time Defines the polling interval for EDH error
detection 1 to 14400 sec
1, 2 EDH Error Clear Clears the EDH error count
(The Yes option remains visible after
selection in CCS software applications
only.)
• No
• Yes
1, 3 Input Frame Delay Sets the amount of input frame delay 0 to 6 frames
Table 3-5. Control Parameters (Continued)
Bank,
Rotary
Switch
Parameter Name Function Options