Nexio® NX1011 Series
Chapter 1
Hardware Guide
Overview
© 2014 Imagine Communications Corp.
Proprietary and Confidential.
September 2014 | Page 9
Back Panel Connectors
Label
Connector
Power Supply Modules
650 watt redundant, hot swappable power supply
modules.
Mouse
Connector for PS2 mouse.
Keyboard
Connector for PS2 keyboard.
USB
Unassigned USB 2.0 ports.
RS-232
9-pin D-sub connector for RS-232 serial port
connection. (This port can be used with a Time Code
Corrector module to synch the device to your house
network time reference.)
VGA
15-pin port for primary VGA monitor connection.
Gigabit Ethernet
RJ-45 10/100/1000 Mbps base band connections.
There are 4 or 6 gigabit Ethernet ports depending
on your configuration.
U-LED
LED lights up when you press the UID button.
Fibre Channel
2 fibre channel ports. Fiber optical cable is used to
connect the frame to shared storage.
Port 1
is used for the primary connection to
storage.
Port 2
can be used according to your system
design.
10 Gigabit Ethernet
(Lower-right Connectons)
10G SFP+ optical port connections.
4 ports for Gigabit Ethernet
2 ports for 10 Gigabit Ethernet
Ethernet Ports
There are four or six gigabit Ethernet ports on the NX1011 depending on the type of NX1011 server you
have. Nexio servers that operate in a Storage Area Network (SAN) environment use Ethernet to keep all
nodes in sync with each other and to perform functions not carried out via the fibre channel ports
assigned to the network. The Ethernet ports are typically used for communications to the Nexio LAN or
for file transfer.
